Shenzhen Nibbe Optoelectronic Technology Co., Ltd.

led tube lighting fixture

led tube lighting fixture
Product Detailed

1.optical parameter:1600lm
2.long life:50,000 hrs
3.Input Voltage:95-265VAC
4.OEM provided
led tube light fixture

led tube light fixture

 Technical Parameter: 

Length: 1500mm/1200mm/900mm/600mm

Diameter: 26 mm

Lamp holder: G13

LED Type: 3528 SMD/3014SMD

LEDs Quantity: 270 pcs /210 pcs/160 pcs/105 pcs

LED Power consumption: 24W/18W/14W/10W

Input Voltage: 220 VAC (Applied for 95-265VAC)

Frequency: 50Hz (Applied for 47-63Hz)

Power Factor: PF>0.97

Luminous Flux: 2100lm/1550lm/1200lm/850lm

Color Temperature: 5000~6500K

Color Rendering Index: Ra>70

Lighting Angle: 120°

Life Expectancy: 50000 Hrs

Working Temperature: -30°C~60°C

Material: Aluminium Alloy & PC(Frosted or Transparent cover)



1. There is No harsh glare, directly replacement for Traditional Fluorescent T10
2. Integrated thermal management system
3. Longlife time more than 50, 000 hours under normal use, especially for office lighting.
4. Optimized light extraction system delivery high lumens.
5. No RF interference, Lead free.
6. Long lifetime - LED feature, reasonable driving, no effect from switch on/off.
7. Green environment, without any harmful materials listed in RoHS.
8. No need maintenance, long life of LEDs, no trouble of replace parts of narmal fluorescent tube.
9. No flash, AC driving, stable light, protect eyes.
10. Good color vision, color temperature can be adjusted from 3000K to 13000K.
11. Easy mounting, can be mounted directly.
12. No need accessories, no need traditional driving and reflector parts.
13. Not easy broken, all materials from inner light sources and outer cases are hard materials, such as Epoxy, ABS, PC,
14. No electromagnetism interference, no high power switch and inductance parts, no environment electromagnetism pollution.
15. High power complication, no transformer, without additional power consumption.


1. Living room, bedroom, kitchen, washroom;
2. School, university, hospital, hotel;
3. Conference, meeting room, show room, showcase;
4. Commercial complexes;
5. Factory, plant, warehouse, office;
6. Supermarket, department store.



 The same size tube can be installed on to the corresponding lamp holder directly before taking 

down fluorescent lamp starter.

1. LED tube can be directly installed into T8 or T10 bracket(take down fluorescent lamp starter);

2. LED tube light apply to inductive light holder.  Electronic ballast fluorescent tube can’t be replaced directly,should take down electronic ballast.






Copyright Notice @ 2008-2021 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.